$69,123.16
Make: Skytrack
Model: 3013
Status: New
Location: Pa
Product Drive: 4wd
Fuel Type: Diesel
Working Height: 19'
Tires: Foamfilled
The Skytrak 3013 is an ultra-compact telehandler that is designed for work in confined spaces. It sports a respectable lift capacity for its size at 2,700 lb. However, its real strength is its compact frame with a width of 4 ft 7 in. This allows it to fit into spaces few other telehandlers can reach. Consequently, it is uniquely suited for work in small spaces.
Due to its extremely small size, the Skytrak 3013 is incredibly well-suited for work in tight spaces. It is great at maneuvering around obstacles and getting through small openings. Additionally, it can use its small stature to do smaller, more precise actions that could lead to disaster for a larger machine. Consequently, this lift is perfect for work in warehouses and other crowded areas.
Check Out Our Skytrak 3013 Telehandlers!
The Skytrak 3013 offers:
| Performance | |
| Drawbar Pull | 2623 lb / 1189.77 kg |
| Lift Capacity at Full Height | 1555 lb / 705.34 kg |
| Lift Capacity at Max Reach | 1200 lb / 544.31 kg |
| Load Center | 2 ft / 0.61 m |
| Maximum Lift Capacity | 2700 lb / 1224.70 kg |
| Maximum Lift Height | 13 ft 1 in. / 3.99 m |
| Maximum Reach | 7 ft 1 in. / 2.16 m |
| Speed – Maximum Travel | 10.5 mph / 16.90 km/h |
| Outside Turning Radius | 9 ft 9 in. / 2.97 m |
| Speed – Maximum Lift | 10.9 sec. |
| Speed – Maximum Lower | 7.7 sec. |
| Outriggers or Stabilizers | No |
| Speed – Maximum Telescope In | 4.5 sec. |
| Speed – Maximum Telescope Out | 7.5 sec. |
| Dimensional Data | |
| Ground Clearance | 10 in. / 0.25 m |
| Machine Height | 6 ft 7 in. / 2.01 m |
| Machine Length | 8 ft 9 in. / 2.67 m |
| Machine Width | 4 ft 7 in. / 1.4 m |
| Tire Size | 11 / 65 x 12 Pneumatic Ag Tread |
| Wheelbase | 5 ft 7 in. / 1.7 m |
| Power Source | |
| Capacity – Fuel Tank | 14.5 gal. / 54.89 L |
| Engine Horsepower | 24.8 hp / 18.50 kW |
| Engine Manufacturer | Kubota |
| Engine Model | V-1505 |
| Maximum Engine RPM | 2300 rpm |
| General | |
| Axle-Front | High Bias, Limited Slip |
| Axle-Rear | Oscillating |
| Function Pump Type | Gear |
| Hydraulic System Pressure | 3988 psi / 279.28 Kg/cm2 |
| Operating Vehicle Weight | 5280 lb / 2394.97 kg |
| Transmission – Nr Forward Gears Standard | 1 |
| Transmission – Nr Reverse Gears | 1 |
| Transmission Type | Hydrostatic |
Access Lift Equipment offers a comprehensive selection of used telehandlers and other products for safely working at height. So let us match you with the best tool for the job along with a financing solution that makes sense for your budget. Call or email our office to get started today.
