The JLG G5-18A is a great choice for anyone that needs to maneuver loads through crowded spaces. A compact frame of only 6 feet in width gives it the ability to slip through smaller spaces without incident. Additionally, the tight turn radius and responsive controls give it a level of maneuverability that is rarely matched by other telehandlers. So, if these sound right for you, the JLG G5-18A is a great choice. Spec Sheet  

Applications

The JLG G5-18A is well-equipped for use in cluttered or obstructed areas. Whether it be a busy construction site of a well-stocked warehouse, this machine will transport whatever you need with little hassle. Being only 6 feet in width, there consequently aren’t many cases where you wouldn’t be able to get this machine where it needs to go. Additionally, the tight turn radius and easy to use controls make getting it to those places simple and low-risk. This lift also keeps operator comfort in mind. The cab is spacious, the controls are intuitive, and it has a built-in armrest for use while driving. Consequently, operators won’t experience fatigue as they might expect from a lift that doesn’t take such things into account.

 Check Out Our JLG G5-18A Telehandlers!

 

JLG G5-18A Specifications at a Glance

The JLG G5-18A offers:

• 5,500 lb. maximum lift capacity
• 18 ft. 4 in. maximum lift height
• Tight turn radius
• Responsive controls
• Intuitive single joystick and integrated armrest

 

Performance
Breakout Force	8900 lb / 4036.97 kg
Drawbar Pull	8700 lb / 3946.25 kg
Lift Capacity at Full Height	4400 lb / 1995.81 kg
Lift Capacity at Max Reach	1850 lb / 839.15 kg
Load Center	2 ft / 0.61 m
Maximum Lift Capacity	5500 lb / 2494.76 kg
Maximum Lift Height	18 ft 4 in. / 5.59 m
Maximum Reach	10 ft 11 in. / 3.33 m
Speed – Maximum Lift	4.6 sec.
Outside Turning Radius	10 ft 7 in. / 3.23 m
Speed – Maximum Crowd	2 sec.
Speed – Maximum Dump	2.5 sec.
Outriggers or Stabilizers	No
Speed – Maximum Lower	4.6 sec.
Speed – Maximum Telescope In	3.8 sec.
Towing Capacity	6600 lb / 2993.71 kg
Speed – Maximum Travel	15 mph / 24.14 km/h
Speed – Maximum Telescope Out	6.7 sec.

 

Dimensional Data
Ground Clearance	11 in. / 0.27 m
Machine Height	6 ft 4 in. / 1.92 m
Machine Length	10 ft 9 in. / 3.28 m
Machine Length (Forks)	12 ft 6 in. / 3.82 m
Machine Width	6 ft / 1.82 m
Tire Size	12×16.5 Pneu
Wheelbase	7 ft 6 in. / 2.29 m

 

Power Source
Capacity – Coolant	3.5 gal. / 13.25 L
Capacity – Engine Oil	9.1 gal. / 34.45 L
Capacity – Fuel Tank	24 gal. / 90.85 L
Engine Horsepower	74 hp / 55.20 kW
Engine Manufacturer	Deutz
Engine Model	TD 2.9L L4 T4F
Maximum Engine RPM	1800 rpm

 

General
Axle-Front	High Bias, Limited Slip
Axle-Rear	Planetary
Capacity – Hydraulic Reservoir	16 gal. / 60.57 L
Function Pump Type	Gear
Hydraulic System Flow	19.1 gal/min. / 72.29 L/Min
Hydraulic System Pressure	3500 psi / 245.11 Kg/cm2
Operating Vehicle Weight	11000 lb / 4989.52 kg
Service Brake Type	Wet Multi-Disc
Transmission – Nr Forward Gears Standard	1
Transmission – Nr Reverse Gears	1
Transmission Type	Hydrostatic

 

Request a Quote From Access Lift Equipment

Access Lift Equipment offers a comprehensive selection of used telehandlers and other products for safely working at height. So let us match you with the best tool for the job along with a financing solution for your budget. Call or email our office to get started today.