Our Inventory

Genie GS-1932

Product Information

Make: Genie

Model: GS1932

Status: New

Location: Pa

Product Drive: 2wd

Fuel Type: Electric

Working Height: 25'

Tires: Nonmarking

Description

The Genie GS-1932 is a slab scissor lift that works as a great option in basically every way. Its AC E-Drive configuration means it can run for long periods of time with quiet, clean operation. Consequently, it is easy to use indoors without excess fumes causing issues. Additionally, it sports a maximum working height of 25 ft 3 in, which it can position in tight spaces due to its narrow frame. This machine is a jack of all trades that works wonders in any situation. Spec Sheet  

Applications

The Genie GS-1932 is built for use in just about any situation. It sports a long battery life that lets it work for long hours without need to recharge. Additionally, it easily fits through doorways for work indoors. Its lack of inside turn radius also allows it to maneuver around obstacles and terrain with ease. Consequently, this machine can handle difficult tasks in crowded areas, inside or outside.

Check Out Our Genie GS-1932 Scissor Lifts!

 

Genie G S-1932 Specifications at a Glance

The Genie GS-1932 scissor lift offers:
  • 25 ft. 3 in. maximum working height
  • 500 lb. platform capacity
  • 2 ft. 8 in. machine width
  • AC E-Drive configuration
 
Power Source
Batteries 24V DC (4x6V 225Ah)
Capacity – Hydraulic Tank 1 gal / 3.8 L
 
Performance Data
Turning Radius – Outside 5 ft 1 in / 1.55 m
Turning Radius – Inside 0 ft / 0 m
Drive Speed – Platform Elevated 0.5 mph / 0.8 km/h
Drive Speed – Platform Lowered 2.5 mph / 4.0 km/h
Gradeability 25 %
Lift Time 26 sec.
Lower Time 22 sec.
Maximum Lift Height 19 ft 3 in / 5.85 m
Platform Capacity – Extension 250 lb / 113 kg
Platform Capacity – Unrestricted 500 lb / 227 kg
 
Dimensional Data
Ground Clearance 3.2 in / 8 cm
Machine Height 5 ft 11 in / 1.8 m
Machine Height – Rails Folded 7 ft 1 in / 2.16 m
Machine Length 6 ft / 1.83 m
Machine Weight 2,929lb / 1,456 kg
Machine Width 32.2 in / 0.77 m
Platform Dimension A 5 ft 5 in / 1.66 m
Platform Dimension B 29.9 in / 0.76 m
Platform Extension Length 8 ft 5 in / 2.55 m
Platform Height 19 ft 3 in / 5.85 m
Platform Height – Lowered 3 ft 5 in / 1.04 m
Tire Size 12×4.5 in / 30.5×11.5 cm
Wheelbase 4 ft 4 in / 1.32 m
 

Request A Quote From Access Lift Equipment

Access Lift Equipment offers a comprehensive selection of used boom lifts and other products for safely working at height. So let us match you with the best tool for the job along with a financing solution that makes sense for your budget. Call or email our office to get started today.

Common Questions About Genie Electric Scissor Lifts

What is a Genie electric scissor lift used for?

Genie electric scissor lifts are versatile aerial work platforms designed for working at height in indoor or flat outdoor environments. They’re widely used for:

  • Electrical and lighting installations

  • Ceiling maintenance and HVAC repair

  • Warehouse inventory and shelving access

  • Facility management and routine inspections

  • Construction tasks in finished or enclosed spaces

Their quiet electric motors make them especially suitable for emission-sensitive indoor environments like schools, hospitals, offices, and data centers.

Yes, some Genie electric scissor lifts can be used outdoors, but only on flat, firm, and level surfaces. These lifts are best suited for indoor environments but can handle light outdoor work in good weather conditions. Always check the specific model’s specs and wind ratings before outdoor use.

Yes, safety is a core feature of Genie’s design. Most models include:

  • Emergency stop buttons

  • Tilt sensors and alarms

  • Manual lowering valves

  • Non-marking tires

  • Guardrails and entry gates

Optional safety accessories like motion alarms, flashing beacons, and folding rails are also available for added protection.

Most Genie platforms are designed to support one to two workers, depending on the model and platform size. Load capacities typically range from 500 to 1,200 lbs, which includes personnel, tools, and materials.